Services
Plastering Services
Boarding, skimming, repairs and full property plastering across Nottingham and Eastwood, finished smooth and left clean.
Boarding & Skimming in Nottingham
Plasterboard hung and skimmed flat across walls and ceilings, ready for paint.
What's included
- Plasterboard fitted to walls and ceilings
- Joints taped and filled
- Full skim coat applied
- Corners and edges finished square
- Dust sheets down, floors protected
- Site swept and cleared daily
This covers stud walls, dot-and-dab, and ceilings that need boarding from scratch, followed by a full skim finish. I board first, let it settle, then skim so the plaster sits flat and doesn't crack along the joints later.
Most rooms take a day or two depending on size, and I dust sheet everything before I start. Once the skim's on and drying, I clear away boards, offcuts and dust so the room's usable as soon as it's dry.
Plaster Repairs in Nottingham
Cracks, holes and damp patches patched and blended into the existing wall.
What's included
- Cracked plaster cut back and filled
- Holes patched and skimmed
- Damp-damaged areas made good
- Finish matched to surrounding wall
- Sanded smooth for painting
- Mess cleared before I leave
Small jobs like a crack above a doorway, a hole from a removed radiator, or a patch of blown plaster after a leak. I cut the damaged area back to sound plaster first so the repair doesn't just crack again in a few months.
The finish is matched to the rest of the wall so there's no obvious join once it's painted. These are usually quick jobs, often done in a single visit, and I clean up as I go.
Ceiling Plastering in Nottingham
Ceilings boarded or re-skimmed flat, with the room protected while I work.
What's included
- Old ceiling stripped where needed
- New plasterboard fitted
- Full re-skim to a flat finish
- Coving and edges made good
- Furniture and floors covered
- Debris removed on completion
Whether it's a new ceiling in an extension or an old, cracked one that needs re-skimming, I check what's underneath before deciding whether to board over or strip back. Ceilings show every imperfection once painted, so getting it flat matters.
I work overhead carefully to keep mess down, but I still sheet the room and furniture beforehand. Once finished, the ceiling's left flat and level and the room's cleared of dust and offcuts.
Full Property Plastering in Nottingham
Every room plastered across a renovation or extension, managed room by room.
What's included
- Full boarding and skimming throughout
- Ceilings and walls to every room
- Coordinated around other trades
- Work sequenced room by room
- Site kept tidy between rooms
- Snagging checked before finishing
For extensions, renovations and full refurbishments, I take on the whole plastering job rather than one room at a time, working through the property in a logical order so other trades can follow behind me.
I keep in touch throughout so you know what stage things are at, and I check back over the finished work before calling it done. Each room's cleaned up as I move to the next.
Rendering & Finishing in Nottingham
External and internal render applied and finished flat, with clean, sharp corners.
What's included
- Render mixed and applied by hand
- Corners and reveals finished square
- Surface floated to a level finish
- Cracks and old render made good
- Areas protected during work
- Site cleared after each visit
This covers render finishing internally and externally, getting a flat, even surface with corners and reveals kept sharp. Preparation matters here, so any loose or damaged render is cut back before the new coat goes on.
Once applied, the surface is floated level and left to cure properly rather than rushed. I keep windows, doors and paths covered while working nearby to avoid splashes.
Artex Removal & Re-skimming in Nottingham
Old artex stripped or skimmed over, leaving a flat, modern ceiling or wall.
What's included
- Artex removed or skimmed over
- Surface prepared before plastering
- Full skim to a flat finish
- Sanded smooth for painting
- Dust contained with sheeting
- Room cleared once finished
Old artex ceilings and walls can either be stripped back or, more commonly, skimmed straight over once they're keyed and prepared properly. I assess the condition first, as some artex needs removing rather than covered.
The room is sheeted throughout since this job can be dusty, and I skim to a flat modern finish once the old texture's dealt with. Everything's cleared and hoovered down before I leave.
How It Works
Three steps, no pressure
1
Call or message
Tell Aaron what needs doing and roughly the size of the room or job. He'll ask enough to know if he needs to come and see it first.
2
Free quote
Aaron will give you a fair, honest price with no obligation. If it needs a look in person, he'll arrange a time that suits you.
3
The work
Aaron gets on with the job, keeps you updated as it goes, and cleans up every day so the property's left neat and tidy when he's done.